One or more treatments can be applied to an entire shower design via the builder screen. Each panel can then be adjusted by removing or adding treatments in the Panel Editor.
Adding or removing treatments is done with the Treatment drop down selector by clicking on the check box next to each item. A checked treatment means it is included, and unchecked it is not included.
The treatments included for a panel are shown on the Glass Order for each panel.
How to change the included treatments and the location of the associated drop down menu are shown in the screen shots below.
Highlighted in the red box below is the Treatment selector drop down menu. Checking an option here will apply it across all panels and doors in the design, not checking it will remove the treatment.
In this design we have a panel and a door. I will demonstrate how to set a treatment to apply across the entire design (all panels) first, then remove it from the door only by editing the door panel.
When removing an option in the panel, the Builder will still have the selections previously configured. Changes to an individual panel affect that panel only
1 - Apply the treatment across all panels
Here we select to apply the "Clear Shield" treatment across all panels using the pictured drop down menu
2 - Access the door panel and view the treatments
Highlighted here in the red box is the panel treatments set for this panel only.
3 - Remove the treatment from the door
Now highlighted below is where I have removed it from the door.
Glass Order Examples
Glass Order Page 2 (Side Panel)
Now when I print my Glass Order treatments will be shown on the top left of each panel page.
Glass Order Page 3 (Door Panel)
As the treatment was removed from the door, no treatments show on the glass order